3D Origami Swan tutorial...by Rituu Agrawaal

 

 

 

hello friends here I am adding step by step process to make a snow white origami swan and ...

For that you need ...

1. A4 size white paper 32 sheets.

2. Seizer

3. Fevicol

Here we go ...

look at the pictures and make the 4 stripes of one A4 size paper then again make with these 4 stripes 16 total same size pieces.
apply this process with all 32 sheets and make 510 rectangles.

 

 

Now with each rectangle make a triangle ....total 510 triangles needed.

now with triangle start to make body of the swan . for this put the pieces together as shown in the following pictures...by putting one leg of a triangle into another pocket of other triangle. now in this way to make a base you need total 60 triangles first .

now  on the base of 60 triangles add another 30 triangles to add 3rd level. turn the down side up and then in the same way add 4th, 5th and 6th level of each 30 triangles. so with this 6 levels your swan's body is ready.

then add wings to swan's body....for this you need 156 triangles.
Here add 12 triangles on each side of the body. one side opposite to the other one.
then here for 7th level both sides of the body you already added 12 triangle.

then 8th level 11*2(sides) add 11 triangles
then for 9th level add 10 triangles on both sides.
then 10th level 9*2
now in this manner you continue in an analogous manner to get 18th level of 2*1 triangles.

here your both wings also ready...

then to add tail part of the swan...you need 21 triangles

19th level...add 6 triangles on one side between the wings to start a tail.
then 20th level add 5 triangles on 19th level.
for 21st level add 4 triangles
22nd level add 3 triangles
23rd level add 2 triangle
24th level add 1 triangles to complete the tail.

Now its a time to make a neck of the white swan...for this you need 32 triangles .
add the triangles as shown in the picture to form the neck.

Now we need to make a nest to give a final touch this swan.

for this you need make 3 cirles as shown in the picture.
1. base part 50 triangles.
2. lower part 40 triangles.
3. upper part 25 triangles.

now put the upper one on the lower one as shown in the picture and attached the base part also to form complete nest.
Now just paste the swan on the nest to finish the process of making a snow white swan.

I am hopeful that you people will like this tutorial and will surely share with your friends to make their own swan...